Filter
Top Products
●
●
properly installed in accordance
3
and unplug your air conditioner ;
with the Installation Instructions
before making any repairs.
j
;
.,
before it is used.
NOTE’We strongly recommend
Repair or replace immediately
that any semicing be performed by ~
all electric semice cords that have
a qualified individual.
become frayed or othemvise
$.
:
}
damaged.
$
.
.,*.*-,k -...: . ,.- ,, ,.-’*,W6 t“,.- , ..?. $.’ >..- . .
..-%W*... :.....*,, .-J .,,&.! %. .. .
. ~ ., . +
l.-s+ ..,.. ,..,, <**,., , .4,,, * . , ,.<,s. ,
“.*>.++~~,,+,...-,r.. ..%..,-.> ., . ., .,, /- ,,..
— .*..* ~..*.w.,.-,.,,* .,* *...**.—
If an extension cord is required to
A CAUTION:
reach the nearest wall receptacle,
use only a UL-listed, 3-wire,
DO NOT use an extension cord with
grounded, 14 gauge, 15A, 125V
any of the 20&Z30-volt models.
appliance extension cord. For
models with nameplate ratings
greater than 12 amperes, do not
use an extension cord.
Because most 2-prong outlets are
7
not grounded, we strongly advise
0
on
against using an adapter plug.
67
However, a temporary connection
.
o~
/0
T
.
\
“Q
“--l
may be made where local codes
6P
J
permit and if the 2-prong wall out-
let is properly grounded.
This is a temporary method.
When you plug the adapter in,
UL-listed adapters are avail-
make sure the larger prong goes
able at most hardware stores.
into the larger slot to provide the
proper polarity for the power cord.
SAVE T~SE INSTR UCTIONS
FOR PROPERGROUNDING:
1 Screw the adapter to the outlet,
using the outlet cover screw.
2 Groundthe outlet throughthe house
wiring.
When disconnecting the power
cord from the adapter, hold the
adapter close to the outlet while
pulling the plug out. If this is not
done, the grounding connector is
likely to break with repeated use.
If the grounding connector breaks,
DO NOT USE the air conditioner
until a proper ground has again
been made.
3