Filter
Top Products
1 Extend the filler panels on both
INSTALLATIONWITHOUT THE
sides until they touch the window
FILLERPANELS
tracks.
If filler is required on the sides
Z Secure the top and the bottom
of the air conditioner, cut filler
with four 3/4” long screws on
sheet (not supplied) to size and
fill both sides.
each side.
1
2
Cut the foam top window gasket
3 Attach the window locking
to the window width.
bracket with a 3/4” screw.
Stuff the foam between the
11 11
y“
.-
~
/ -//
I
glass and the window to prevent
air and insects from getting into
the room.
2
12
Carefully slide the air condi-
tioner back into the case and
A CAUTION:
replace the 2 screws which
●
secure the unit to the case.
Reinstall the front grille and 5
screws removed earlier. Attach
●
the air filter, front grille insert
and control knobs.
Toavoid injury use additional help
to lift and move the air conditioner
back into the case.
DO NOT Iill the window sash
while the air conditioner is
installed in the case. Always
remove the unit before raising the
window to avoid injury and damage
to the air conditione~
——...-