Stovax Medium Wood & Multi-fuel Stove User Manual


  Open as PDF
of 32
 
7
USER INSTRUCTIONS
5.3 Experience establishes settings to suit personal preferences.
PR8035
Opti Burn Position
Position 1: Full Running
Position 2: Opti-Burn
Adjust left to reduce output
•Lowestheatoutputforburningwood(OptiBurn).This
position helps keep the glass clean, Diagram 9
Shut Down Position
PR8027
•Lowestpossibleheatoutputforburningwood.This
position does not keep the glass clean, Diagram 10
5.4 Do not burn large amounts of fuel with the Airwash control
closed for long periods of time. This reduces the glass
cleaning effect and causes tars and creosotes to build-up in
the appliance and flue system.
5.5 When in use, burning the appliance at high output for a
short period each day also reduces tars and creosote.
5.6 Multi-fuel Stove:
The Solid Fuel setting is from the Centre to the Left
The Wood burning setting is from the Centre to the Right
Once the fire becomes established:
•Movethecontrolfromthewoodstartupposition,See
Diagram 6, to the Multi-fuel position on the left, Diagram
11
PR8032
• Minimumpositionforburningsolidfuel,Diagram11
PR8035
•Maximumpositionforburningsoldfuel.Thisposition
helps keep the glass clean.
A de-dent ball will locate the arm in the correct position see
Diagram 12.
5.2 De-ash the fire bed before re-fuelling, See Ash Removal
•OpentheControl fully to establish a glowing bed before
adding new fuel
•Burnnewfuelathighoutputforafewminutesbefore
adjusting the Control to the desired setting
•Refuellittleandoftenforclean,efficientburning.
5.3 Experience establishes control settings to suit personal
preferences.
Full Heat Position
PR8036
 previous next