Stovax Medium Wood & Multi-fuel Stove User Manual


  Open as PDF
of 32
 
21
INSTALLATION INSTRUCTIONS
3.5 Typical Top Flue Pipe Installation
600mm minimum
PR8053
135 Elbow with access cover
600mm minimum
All models
Connection to chimney
as detailed in Building
Regulations
Flue pipe x 612 long
1000mm max
unsupported
4. REMOVAL OF THE LOG GUARD
4.1 To remove the Log guard:
•LiftLogGuardclearofthesupportingbrackets
•Rotatetoclearthesidesofthedooropening.
Do not use appliance without the log guard in position.
PR8114
5. FITTING AND REMOVAL OF
THE BAFFLES
No tools are required.
5.1 To maintain efficient combustion the Riva Stove is fitted
with a twin baffle system, consisting of upper and lower
baffles.
5.2 First remove the Log Guard from the stove to give access to
the firebox.
3.3 Fitting the flue collar and blanking plate to the top
PR8066
Blanking Cover
Flue Collar
Fire Cement
Flanged Collar
• Fittheblankingplatetothetopflueoutlet
• Usethe4bolts(includingthe2flangedspacersas
shown), seal to the firebox as shown using fire cement
• Fitthefluecollartotherearflueoutletusingthe4bolts
from the cover plate
• Sealtothefireboxusingfirecement
• Donotreplacethetop,rearorcentrefirebricks
• Re-installupperandrearbaffle
3.4 The following flue pipe is available to ensure safe
installation:
5"Tee Stovax Product Code 4516
6"Tee Stovax Product Code 4616
5"135
o
Bend Stovax Product Code 4512
6"135
o
Bend Stovax Product Code 4512
5"FluePipex612mmlong Stovax Product Code 4501
6"FluePipex612mmLong Stovax Product Code 4601
PR8055
Self-tapping screw
Tee with cap
Cap
Seal collar with fire cement
All models
 previous next