Filter
Top Products
4.15 This is a list of the maintenance products you may need
to use
Task Product name
Stovax Code
Number
Glass cleaning Stove glass cleaner 500ml
(wipe on)
4111
Stove glass cleaner
(spray on)
4130
Preventing build-up Protector (15 sachets) 7002
of creosote in flue Protector (1kg tub) 7025
Sealing flue
Fire Cement (500g tub) 2020
pipe joints Fire Cement (600g cartridge) 2021
Re-painting Thermolac Black
(400ml aerosol)
2019
Thermolac Black
(9200ml brush-on)
2057
Cleaning matt Colloidal black (85ml)
7000
black stoves
Protecting your Heat resistant leather gloves
4008
hands
Door sealing rope 14mm Black rope seal
(handy pack)
5000
14mm Black rope seal
(25m reel)
4670
Glass sealing tape
3mm Black rope seal
(handy pack)
4975
3mm Black rope seal
(25m reel)
4974
Fixing rope seal Thermic seal glue
(50ml bottle)
5037
Ash Clean
Vaccuum Cleaner Attachment
2091
4.16 These products, all available from your local Stovax dealer,
along with regular maintenance and use of correct fuels, will
help you to keep your stove in the best condition.
4.17 If you require more information about Stovax group
products, visit ouor website www.stovax.com.
4.18 When using the stove for the first time again it is best to
burn the fire at a low output for the first day of use. This
will allow the new seals to settle and all new fixing glues
and paint to fully cure.
4.19 During this time, the stove may give off some unpleasnt
odours, and we recommend that you keep the room well
ventialted during thsi period to avoid a build-up of fumes.
4.20 If you require help, your local Stovax dealer will be able to
carry out all of your service and maintenance requirements
for a reasonable cost.
10
MAINTENANCE and SERVICING
5.1 Remove the log guard by lifting clear of the supporting
brackets and rotating to clear the sides of the door opening.
The stove should not be used without the log guard in
position.
6.1 To maintain efficient combustion the stove is fitted with a
baffle in the top of the firebox.
6.2 Allow the stove to cool fully before removing the baffle
system.
6.3 To remove the baffle, first remove the log guard from the
stove to give access to the firebox.
6.4 Remove the baffle by lifting the front edge to clear the
support bars, then pull the baffle forward to disengage the
rear edge from the location above air inlet holes. Rotate
the baffle to remove from the firebox through the door
opening.
6.5 The replacement of the system is the reverse of the previous
operations, ensuring it is replaced the correct way around.
5. REMOVAL OF THE LOG GUARD
PR7214
Support Pin
PR7076
Front
6. FITTING AND REMOVAL OF BAFFLE