Filter
Top Products
6
DO THIS:
PRESS FAN
SPEED BUTTON
SELECT
AUTO FAN
Note: The fan speed will begin in HI, then adjust to MED and LO as the room temperature conditions indictates. For example
in cooling, if the room doesn’t get too warm it will stay at LO. If the room temperature rises quickly, such as a door being opened,
it will automatically go to HI speed. The fan speeds will adjust back to LO as the room returns to the original set temperature.
Note: Tap or hold either up(
^
) or down(
v
) button until the desired temperature is seen on display. This temperature will be
automatically maintained anywhere between 60F (16C) and 90F (32C) for cooling mode. The Temperature will be automatically
maintained anywhere between 55F (13C) and 80F (27C) for heating mode. If you want the display to read the actual room
temperature, "FAN SEE ONLY MODE".
Air Conditioner Features
(continued)
DO THIS:
PRESS TO RAISE
PRESS TO LOWER
DO THIS:
PRESS FAN
SPEED BUTTON
SELECT SPEED
YOU WILL SEE
THE SPEED CHOSEN:
TO CHANGE FAN SPEEDS:
DO THIS:
PRESS ON/OFF
BUTTON
YOU WILL SEE:TO TURN UNIT ON:
YOU W ILL SEE:
TO CHANGE
TEM PERATURE SETTING:
YOU WILL SEE:
TO USE AUTO FAN FE ATURE: