Open as PDF
Air Conditioner Features
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote
as shown below and all its functions. Then follow the symbol for the functions you
desire. The unit can be controlled by the touch pad alone or with the remote.
Using Air Conditioner
To reduce the risk of fire, electric shock, or injury to persons, read
the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
To begin operating the air conditioner or heater, follow these steps:
1. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension
cord or an adapter plug.)
2. Press “On/Off” button to turn unit on.
3. Press “COOL” Mode for air conditioning, or press “HEAT” Mode for heater.
4. Press “TEMP/TIME” down
to the desired set temperature.
Review the “Air Conditioner Features” section for other settings.
ON OR OFF
SELECT FAN SPEEDS
SLIDE BATTERY COVER OF REMOVE THE TAB
or the temperature is changed to a lower
setting then back to a higher setting the
compressor will shut off. Wait 3 minutes
before the compressor will restart, this
allows for the pressure inside the
compressor to equalize..Failure to wait 3
minutes may cause inefficient operation
when adjusting the temperature the fan
will continue to run.
If the air conditioner is turned off