Filter
Top Products
NOTE: If wall thickness is 8-1/2" or more, add aluminum
flashing over bottom of frame opening to assure no water
can enter area between inner and outer wall.
1"LONG
SCREW
FIG.2
ALUMINUM FLASHING
OVER BOTTOM OF FRAME
I Prepare and Install
Cabinet
Refer to Step 4 d Window Mounting for assembly of
support brackets.A wooden strip nailed to the outside
wall should be used in conjunction with sill support
angle brackets.
1. Slide chassis from cabinet. Refer back to Step 1 of
Window Mounting.
2. Place cabinet into opening with bottom rail resting
firmly on bottom board d wooden frame.
3. Position cabinet to achieve proper slope for water removal.
(See FIG.1 below.)
FIG. 1
5/16"
TO
3/8"
3/4"PLUS
THICKNESS
SEE PARA 5
brakcet
5. Screw or nail cabinet wooden frame using shims if
frame is oversized, to eliminate distortion. Remember
to maintain proper slope as described in Step 3.
LEVEL '_
4. Secure bottom rail to wood frame with two large wood
screws 1"(2.5 cm)long using the two holes in the bottom
of the channel resting on frame.(See FIG.2 following)
6. Install chassis into cabinet by following all steps in
Step 8 of Window Mounting.(continued)
7