Filter
Top Products
Extend Window Filler
...........Panels
1. Carefully raise window to expose filler panel locking
screws. Loosen screws so filler panels slide easily.
install Chassis into
Cabinet and install
Front to Unit
1, Lift air conditioner and carefully slide into cabinet
leaving 6" protruding,
2. _DO not push on controls OR finned coils.
3, Be sure chassis is firmly seated towards rear of cabinet.
4. Installation of front is the reverse of removal outlined
in Section 1.
2. Extend panels to fill window opening completely.
Tighten locking screws on top,
3. Close window behind top angle.
Install Window Lock
and Sash Seal
1, Trim sash seal to fit window width. Insert into space
between upper and lower sashes.
OW SASH SEAL
2. Attach right angle safety lock as shown,
SAFJTY LOCK
3/4" }orlg hex-
5