Filter
Top Products
25
920-087-04 (3-05)
Friedrich PTAC Accessories
NEW CONSTRUCTION AC CES SO RIES
MODEL NUMBER DESCRIPTION PHOTO
PDXWS
WALL SLEEVE zinc coated steel is prepared in an eleven-step
process, then powder coated with a polyester fi nish and cured
in an oven for exceptional durability. The wall sleeve is insulated
for sound absorption and thermal effi ciency.
16" High x 42" Wide x 13¾" Deep.
PXGA
GRILLE standard, stamped aluminium, anodized to resist
chalking and oxidation.
PXAA
PXDB
PXSC
ARCHITECTURAL GRILLES Consist of heavy-gauge
6063-T5 aluminum alloy:
PXAA– Clear, extruded aluminum
PXDB– Dark bronze acrylic enamel
PXSC– Also available in custom colors.
PXDR10
CONDENSATE DRAIN KIT Attaches to the bottom of the wall
sleeve for internal draining of condensate or to the rear wall sleeve
fl ange for external draining. Recommended on all units to remove
excess condensate. Packaged in quantities of ten.
PXWE
DEEP WALL SLEEVE EXTENSION A four inch deep anodized
aluminium extension that attaches to the outside of the wall sleeve
when the wall is greater than eleven inches thick (9½" when a
subbase is used, 10 inches when a lateral duct is used).
PXSB
DECORATIVE SUBBASE Provides unit support for walls less
than six inches thick. Includes leveling legs, side fi ller panels
and mounting brackets for electrical accessories. Accepts
circuit breaker, power disconnect switch, or conduit kit.
RT2
DIGITAL REMOTE THERMOSTAT Digital elec tron ic
thermostat with "one touch" adjustment. Mounts to wall for
control of unit.
PDXRT
PDXRT – REMOTE THERMOSTAT ESCUTCHEON KIT
This kit contains 10 escutcheons that can be placed over
the factory control buttons when a remote wall mounted
thermostat is used. The escutcheon directs the guest to the
wall thermostat for operation and retains the LED window to
display error codes and diagnostic information.
MODE FAN
RT2
PDXWS
PXDR10
PXWE
PXSB
PXDB
PDXRT