Filter
Top Products
14
To startunit
siti,elc at pec erreporpaotnideggulpdnadellatsnisirenoitidnocriaruoyfI
readytogo.Thefirsttimetheunit isstarted,thecompressorwilldelay forthree
minutes.See AutomaticComponentProtectiononthe followingpage.
1
Touchthe Powerbuttononce.The unitwill automaticallybein Cool
mode with thetemperature setat75°F (24°C) andthe fanspeed at
F1, thesleep setting.
To setmodeofoperation
When you rstturnthe uniton, it will be in the Cool mode (lighton),with
constant fan.
2
Touchthe Mode button once to activatethe MoneySaver
®
(lighton).
MoneySaver
®
ros serp mocehthtiwnafehtselcyctahterutaefasi
so that thefan does notrun allthe time.Thissaves energy and
eromrofnaftnats nocreferpyamuoyrO.noit ac
i dim uh edsevorpmi
ehthcuot,naftnatsnocotnruterot(tnem evomria Mode button two
more times).
In order to runthefanbyitself, do thefollowing:
3
ContinuingfromMoneySaver
®
mode(lighton),touchtheModebutton
once to activate the FANONLY feature(lighton).
The FANONLY settingwillcirculate air in the roomwithout thecom-
pressorcomingon.
To adjusttemperature
4
Usethe Mode button to select eitherthe COOL or MoneySaver
®
function
5
COOLER – Touch the button to lower theroomair temperature.
6
WARMER – Touch the button to raisethe roomair temperature.
7
Pressboth the and ehthctiwsotemitemasehttasnottub
temperature readoutfrom Fahrenheit(°F)toCelsius(°C).
Repeat step 7 to switch from °C back to °F.
To adjust fan speed
8
Touchthe FanSpeedbuttonto seethe currentsetting. Touchit again
to changespeed. F1isthe lowestsetting(SLEEPSETTING/LOW),
F2 is MEDIUM,and F3 is HIGH.
To activate Smart Fan
9
Thereisafourth option,SF, when selectingthe fanspeed.Thisis
the SMARTFAN function.SMART FANDOESNOT OPERATEIN
CONJUCTION WITH THEFAN ONLY MODE.
SmartFan will adjustthe fanspeed automaticallyto maintain the
desiredcomfortlevel. Forexample,ifthe outsidedoorsin yourhome
are opened foranextended period of time,ormorepeople entera
room,Smart Fanmay adjusttoahigherfan speedtocompensate
forthe increasedheatload. Thiskeepsyou from havingto adjustthe
fanspeed on your own.
Howtooperate the Friedrich room airconditioner (XQmodels)
PM
Temp/Hour
Cool
MoneySaver
®
Fan Only
Clock
Start Time
Stop Time
Power
Fan
Speed
Mode
Timer
Set
Hour
10 11 12
13
7
3 4
5
6
18 9 2
Figure 5
To setthe hour clock
10
Touchthe SetHour button to seethe currentsetting (clock light
comeson).The numberthatis displayed is the approximatetime
(hour only).Use the
and
buttonstochange thesettings.BE
SURETO SETA.M.AND P. M. ACCORDINGLY. (P.M.isindicated
by ared lightinthe upperleftcornerofthe display).
To setthe timer
NOTE: Setthe HOUR CLOC Kbefore attempting to settimer functions.
Youcan setthe START and STOPtimesaminimumofone hour apart,and
amaximumoftwenty-three hours apart.
11
Aftersetting thetime, press the Set Hour button once (Start light
comeson).Use the
and buttonsto selectthe time that the
unit will START.
12
After selectingtheSTARTtime,presstheSetHourbuttononcemore
(Stoplightcomeson).Usethe
and buttonsto selectthe time
that the unitwill STOP.After selecting the stoppingtime, pressthe
Set Hour button once.
13
Pressthe TimerOn/Of f button (light turnson) to activate thetimer
function. To deactivate this function, press theTimerOn/Off button
once again (lightturns off).Oncethe on andoff timeshavebeen
selected,theywillremaininmemory and cycle dailyuntil changed.
NOTE: If the unitisunplugged or thepower is interrupted,the HOUR
mustbereset or the TimerOn/Off will notfunctionwhendesired.
Automatic componentprotection
Your unit isequipped withAutomatic Component Protection. To protectthe
compressorofthe unit,thereisathree minutestartdelayifyou turnthe unit
offorifpowerisinterrupted.The fanoperationwillnotbeaffected. Also,ifyou
switch from Cool mode to Fan Only,and switch back to Cool mode,there
is athree minute delaybeforethe compressor comesbackon.