Filter
Top Products
6
Model VF160 Owner's Manual Supplement
Press the [EXIT/NO] key (or the [STOP] key) repeatedly
until exiting the Setup mode.
To go back to the previous step or about the operation,
you can also use the [EXIT/NO] key or the [STOP] key.
<Note>
The title of the program to which the WAV file is loaded
is replaced with the WAV file name loaded (the first 6
characters).
After selecting the load destination program, press the
[ENTER/YES] key.
When selecting a new program as the load destination
(by selecting an option showing "Title" and "New PGM"),
the load operation immediately starts.
When selecting an existing program as the load
destination (by selecting an option showing "Title" and
"Size"), "Overwrite?" and "Sure?" appear.
Pressing the [ENTER/YES] key will start the load operation.
During the load operation, the screen shows something
like the one as below.
As the data load goes on, the remaining data size shown
on the screen counts down.
7
8
<Note>
If the current drive does not have enough available
space for loading the WAV file, the size indication on
the screen shows a negative value (
"-***"
).
In such a case, select a program that can be replaced
with the WAV file loaded without causing the disc space
shortage, or delete unnecessary programs by the
"de-
lete PGM"
menu in the Setup mode.
When the screen shows "Title" and "size", the selected
program will be deleted and replaced with the WAV file
loaded.
When the screen shows "Title" and "New PGM", the WAV
file loaded will create a new program.
Flashing
When the load operation is completed, "Load Completed!"
appears on the screen.