Filter
Top Products
www.fmiproducts.com
109493-01R12
OPTIONAL GAS LINE INSTALLATION
Continued
and connections must be tested
for leaks after the installation
is completed. After ensuring
that the gas valve is on, apply
soap and water solution to all
-
-
-
ate an unvented gas log set in
removed.
GLASS DOOR INSTALLATION
Figure 20 - Installing Top Door Frame
Top Door Frame
Smoke Shelf
Figure 21 - Installing Bottom Door Frame
Bottom
Door Rail
Ash Box
Center
Brick
Ring
Handle
Screws
If you install a decorative gas appliance
(vented gas log), the decorative gas appliance
must comply with the Standard for Decorative
Gas Appliance for Installation in Solid Fuel
Burning Fireplaces, ANS Z21.60 or Z21.84
and shall also be installed in accordance with
the National Fuel Gas Code, ANSI 7223NFPA
54 latest edition.
has been used for wood burning,
cleaned of soot, creosote and ashes
-
osote will ignite if heavily heated.
decorative vented gas log, the
damper must be removed or per-
manently locked in the fully open
position and the glass doors must
be in the fully open position.
frame before installing glass door.
1. Remove screws from smoke shelf (see
Figure 20).
2. Mount top door frame and secure with
screws removed in step 1.
3. Remove center brick by pulling ring handle
(see Figure 21).
4. Remove ash box.
5. Remove three screws located at front of
rebox (see Figure 21).
6. Align bottom rail mounting holes with
holes at front of rebox and secure with
screws removed in step 5.
7. Place ash box in place. Replace center
brick.