FMI BVC-50Y Indoor Fireplace User Manual


 
www.fmiproducts.com
122280-01E6
SPECIFICATIONS
GAS RATING - NATURAL
BBM-36N-TKA BBM-42N-TKA BBM-50N-TKA
Max. Input Rating: 52,000 Btu/Hr 56,000 Btu/Hr 60,000 Btu/Hr
Manifold Pressure: 3.5" WC (.87 kPa) 3.5" WC (.87 kPa) 3.5" WC (.87 kPa)
Min. Supply Pressure: 4.5" WC (1.12 kPa) 5.0" WC (1.24 kPa) 5.0" WC (1.24 kPa)
Max. Supply Pressure: 10.5" WC (2.66 kPa) 10.5" WC (2.66 kPa) 10.5" WC (2.66 kPa)
Orice Size: # 26 # 23 # 18
GAS RATING - PROPANE/LP
BBM-36P-TKA BBM-42P-TKA BBM-50P-TKA
Max. Input Rating: 46,000 Btu/Hr 52,000 Btu/Hr 57,000 Btu/Hr
Manifold Pressure: 10" WC (2.49 kPa) 10" WC (2.49 kPa) 10" WC (2.49 kPa)
Min. Supply Pressure: 11" WC (2.74 kPa) 11" WC (2.74 kPa) 11" WC (2.74 kPa)
Max. Supply Pressure: 13" WC (3.23 kPa) 13" WC (3.23 kPa) 13" WC (3.23 kPa)
Orice Size: # 46 # 44 # 43
*For the purpose of input adjustment.
Figure 2 - Possible Locations for
Installing Appliance
INTERNAL WALL
INSTALLATION
CORNER
INSTALLATION
FULL
PROJECTION
INSTALLATION
FLUSH
INSTALLATION
SELECTING LOCATION
To determine the safest and most efcient
location for your appliance, you must take into
consideration the following guidelines:
1. The location must allow for proper clear-
ances (see clearance information on
page 10).
2. Consider a location where heat output
would not be affected by drafts, air con-
ditioning ducts, windows or doors.
3. A location that avoids the cutting of joists
or roof rafters will make installation easier.
Figure 1 shows a plan view of a few com-
mon locations.
Flush installations are recommended where
living space is limited or at a premium and
since the space required to enclose the ap-
pliance would be located beyond an outside
wall, this would also reduce the cutting of
joists, roof rafters and such. Check local
codes for any restrictions.
 can extend any
distance into the room. A projection may
be ideal for a new addition on an existing,
nished wall.
Corner installations make use of space
that may not normally be used and provides
a wider and more efcient range for radiant
heat transference.
 provide a discreet
option for room separation and can also be
ideal as an addition to an existing wall.