Filter
Top Products
– 12 –
6(&85,1*7+(35(0,6(6
Arming the System
Arming the System With No Delay
Use NO DELAY with STAY mode when you are staying home and do not expect anyone
to use the entrance door.
Use NO DELAY with AWAY mode when the premises will be vacant for extended
periods of time such as vacations, etc.
When armed with NO DELAY, the system will sound an alarm if a protected door or
window is opened, including the entrance door. You may leave through the entrance door
during the exit delay period without causing an alarm, but an alarm will sound as soon as
someone reenters.
To arm with NO DELAY:
+
AWAY
or
STAY
+
NO DELAY
Your security code
**
** See Quick Arming paragraph.
Quick Arming
If Quick Arm was programmed by the installer, you do not need to enter the security code
to arm the system. Instead, simply press and hold down the desired arming key for at
least 2 seconds. The security code must always be used to disarm the system, however.
To arm if Quick Arm is active:
AWAY
or
STAY
hold down for at least 2 seconds
To arm with NO DELAY if Quick Arm is active:
AWAY
or
STAY
then
NO DELAY
hold down for at least 2 seconds
IMPORTANT: The Babysitter Code and Installer Code cannot disarm the system unless
it was used to arm the system. In addition, if the system is armed by pressing and holding
the Quick-Arm buttons, neither the Babysitter Code nor Installer Code can disarm the
system.