Filter
Top Products
– 28 –
SECURITY CODES
To Add a User or
Change a User's
Code
Important:
Temporary users of the system (e.g., babysitters, cleaning staff, etc.) should not be
shown how to use any system function they do not need to know, such as bypassing protection
zones for example.
Sequential key depressions for all steps in a procedure must be made within 2 seconds of one
another, or else the entire entry is aborted and must be repeated from its beginning (e.g.,
perform steps 1, 2, and 3 below with no delay between steps).
(Master Code) CODE
1. + 8 Enter your 4-digit master code then press CODE key.
2. Enter 2-digit user number.
(User Number) Enter the 2-digit User Number (03–16) for the user you are adding or changing.
3. Enter 4-digit user's code.
(User's Code) Enter the new 4-digit security code for that user.
To Delete a User
(Master Code) CODE
+ 8 Enter master code then press CODE key.
2. Enter 2-digit user number to be deleted.
(User Number) Enter the 2-digit User Number (03–16) for the user whose code you are deleting.
Wait (about 3 seconds) until the keypad beeps once before pressing any other
key. The code is automatically deleted.
To Change Your Master Code
Original Master Code CODE Master’s User No. New Master Code New Master Code
Note that the new Master
+ 8 + 0 2 + +
Code
must be entered twice.