Filter
Top Products
– 18 –
ARMING ALL PROTECTION
(With Entry Delay ON)
2-Partition AWAY
Arming
(Continued)
To arm both partitions, first make sure both partitions are READY TO ARM.
AWAY AWAY
1. + 2 + 2 ENTER MASTER CODE THEN PRESS AWAY
(Master Code) TWICE
Example: 7 2 9 6 and press the AWAY key, then
press the AWAY key again.
2.
ARMED
**
AWAY
**
YOU MAY EXIT NOW
The "You May Exit Now"
portion of the message
disappears when the exit
delay expires.
The first press of AWAY arms the local partition, the
second press of AWAY arms the other (remote) partition.
The “Armed Away” display should appear, and remain
displayed (with exit warning beeps, if programmed)
throughout the exit delay period if both partitions were
successfully armed AWAY. The red ARMED indicator
should also light.
If the “READY TO ARM” message re-appears when the
second AWAY key press is made, both partitions have
failed to arm due to an open zone in the remote partition.
If the remote partition is not ready to arm, neither
partition will arm when using this particular
procedure.