Filter
Top Products
14
Installing the Leaf Light Kit – LKHF7260**
▲
WARNING
To avoid fire or shock, follow all wiring instructions
carefully. Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
1. Remove the plug, lockwasher and nut from the bottom
of switch cup cover.
Figure 1 Figure 2
Figure 3 Figure 4
2. Mount bowl fitter unit on switch cup cover with lockwasher
and nut provided.
3. Locate white and blue wires labeled “FOR LIGHT”.
Securely connect white-to-white and blue-to-black wires
as shown. Push the connectors under the edge of the
receiver unit housing.
4. Carefully connect the main connector & antenna wire
connector and push all wires back into switch cup housing
of fan.
CAUTION
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before installing light
kit.
Leaf Fan Model:
IMPORTANT!
Align Green
Dots
IMPORTANT!
Align Orange
Dots