Filter
Top Products
89
Charging the
Forever Flashlight
7-in-1 Survivor Tool
Your Forever Flashlight
7-in-1 Survivor Tool
includes three great options
to charge your unit. It will
never need a battery. For
directions on these options
see below:
Charging your unit
using your built-in
rechargeable batteries.
It is charged by winding
the handle on the unit. For
best results, follow these
steps in charging:
1. Turn the unit off.
2. Turn your
BATTERY
SELECTION
knob to
CRANK.
3. Pull out the
CRANK
HANDLE
, located on the side
of the unit.
4. Hold the unit parallel
to the ground and wind the
handle three to five min-
utes. Rotate the handle at a
speed of approximately 120
rounds per minute. It is rec-
ommended to charge your
Forever Flashlight 7-in-1
Survivor Tool for three to
five minutes before first use
or after long periods of non-
use.
NOTES:
• Your Forever Flashlight
7-in-1 Survivor Tool will
provide you with up to
twenty minutes of light/
radio
(volume at 1/3 the
capacity)
when charged by
winding the unit for one
How to Use
Features
Our Forever Flashlight 7-in-1 Survivor Tool
combines an flashlight, emergency unit and
charging capability all into one handy unit.
• Rechargeable batteries. This model does not need an
external power source. Instead it can be recharged by
spinning the built-in generator to recharge the internal
battery for optimum charging.
• Super-bright light.
• Zero maintenance required
(when regular batteries are not in use).
• AM/FM Radio.
• Emergency seat belt cutter. In case of emergency,
the Forever Flashlight 7-in-1 Survivor Tool can cut
through the belts easily.
• Loud siren and bright red blinking light for
emergency situations.
• Magnetic plate for convenience in attaching the
Forever Flashlight 7-in-1 Survivor Tool on
any metallic surfaces.
•
In case of emergency, you can use the window
breaker to break glass or other breakable surfaces.