Excalibur electronic 9013 Home Safety Product User Manual


 
built-in batteries. See page
nine for more information
on charging the Forever
Flashlight 7-in-1 Survivor
Tool.
WRIST BAND:A conven-
ient handy strap for carry-
ing.
EMERGENCY SEAT BELT
CUTTER: Flip the Forever
Flashlight 7-in-1 Survivor
Tool upside down
(See
Diagram 2)
and hook the
BELT CUTTER on the seat
belt. In case of an accident
you can easily cut through
a seat belt to get to safety
quickly.
6V DC INPUT JACK:
Connects to an AC/DC
ADAPTER
(not included).
OPEN/CLOSE: Access
to the battery compart-
ment. Please switch to
OPEN to open the compart-
ment and
CLOSE to shut
the compartment.
LOUD SPEAKER: This is
the speaker for the emer-
gency siren and radio.
7
on and to increase the
VOLUME. Turn counter-
clockwise to decrease the
VOLUME and to turn the
radio
OFF.
AM/FM MODE: Slide to
right to select
AM stations.
Slide left to select
FM sta-
tions.
MAGNETIC PLATE:
A MAGNETIC PLATE is
located on the right
side of the unit. You
can use it to attract
iron or steel. This will
allow you to attach
the Forever Flash-
light 7-in-1 Survivor
Tool onto any metal
surface
(See Dia-
gram 1)
. Also this
can assist you in picking
up metal objects.
BATT/CRANK: This is a
battery selection mode on
your two options to charge
this unit.
Use the
BATT switch to
run on regular batteries.
Switch over to
CRANK and
you can access the crank
handle to recharge the
6
Diagram 1: The magnetic plate
can attach to any metal surfaces
or pick up metal items easily.
Diagram 2: In an emergency,
you can use the handy seat
belt cutter to cut through
your seat belt and escape
easily.