Filter
Top Products
5. Position the fabric so that the needle is
2mm (1/16 inch) in front of the area to be
darned, and then lower the presser foot
lever.
When lowering the
presser foot, do not push in the front of
the presser foot, otherwise the darning
will not be sewn with the correct size.
Please Note:
6. Pass the upper thread down through the
hole in the presser foot. Pull down the
buttonhole lever then push it back. The
buttonhole lever is positioned behind the
bracket on the buttonhole foot. Gently hold
the end of the upper thread in your left
hand, and then start sewing.
Please Note: When you select any
buttonhole pattern or darning pattern,
LCD screen will be demonstrated the
warning animation message display, it
is to remind you to lower the buttonhole
lever.
8. If the sewing range is too big to sew, then
we suggest you can sew several times (or
cross sew) to get better sewing result.
7
7. Darning stitches are sewn from the front of
the presser foot to the back, as shown.
42
DARNING STITCH
DARNING STITCH
6
PUSH
2mm
5
8