Filter
Top Products
Changing the needle position
These setting apply only to pattern 00-04. The pre-set
position is "3.5", center position. When you press the
" " stitch width adjustment button, the needle position
will move to the left. When you press the "+" stitch
width adjustment button, the needle position will move
to the right. On the LCD screen, the point illustration
and the number indicate the needle position.
...
Changing the stitch length
To shorten the stitch length, press the " " stitch length
adjustment button. For a longer stitch length, press the
"+" stitch length adjustment button.
Generally speaking, the thicker the fabric, thread and
needle, the longer the stitch should be.
T
T
Adjusting the stitch width
The maximum zigzag stitch width for zigzag stitching is
"7.0"; however, the width can be reduced on any
patterns. The width increases as you press the "+"
stitch width adjustment button from "0.0-7.0".
Adjusting the stitch length
The density of zigzag stitches increase as the setting
of stitch length approaches "0.2".
Neat zigzag stitches are usually achieved at "1.0-2.5".
Closed up zigzag stitches (close together) are referred
to as a satin stitch.
STRAIGHT STITCHES AND NEEDLE POSITION
STRAIGHT STITCHES AND NEEDLE POSITION
ZIGZAG STITCHES
ZIGZAG STITCHES
30
A
7.05.0
3.0
1.0
4.5
3.0
2.01.00.5
0.0
4.5
3.0
2.01.00.5
0.0 2.0
3.5
5.0 7.0