Filter
Top Products
AQUAGUARD CLASSIC
PUMP MODEL - THE
COMPLETE WATER
PURIFIER
Aquaguard Classic is the most advanced water purification system using the principle of ultraviolet treatment. Before we go
on, take a look at the picture alongside. As you can see the Aquaguard Classic has the following components:
a. In-built pump b. The Pre-filter (optional) c. Activated Carbon Chamber d. The Ultraviolet Chamber
e. The Electronic Monitoring System. Aquaguard Classic works simply, but effectively. The in-built pump pumps water from
a storage container which then passes through the following stages:
ACTIVATED CARBON
In this stage, the water passes through
specially treated, silver impregnated
activated carbon which adsorbs colour,
odour, organic impurities, and free gases
like chlorine.
UV CHAMBER
The next stage is where the water is
subjected to the ultraviolet treatment
which has been documented as a proven
method for eliminating water borne
disease causing bacteria and viruses. In
fact, Aquaguard Classic’s ultraviolet
germicidal dosage, even at its lowest, is 1.2
times of that required to destroy all
known water borne disease causing
organisms.
THE PRE-FILTER
The water first passes through the
pre-filter which incorporates a specially
developed multi-layered cartridge which
strains out physical impurities present in
the water, such as dust, dirt and mud.
STAGE 1
Aquaguard Classic has one more benefit. A unique Electronic Monitoring System which monitors
the purification process and stops the flow of water immediately, if the level of purification is inadequate.
So you see, the Aquaguard Classic is a complete water purification system
that ensures you get clear, bacteriologically safe drinking water at all times.
Note: Kindly ensure that the source (storage container) has enough water before
you switch on your Aquaguard Classic.
4
STAGE 3STAGE 2