Filter
Top Products
A STEP-BY-STEP GUIDE
TO USING YOUR
AQUAGUARD CLASSIC-
PUMP MODEL
Note : 1. In case of low voltage, the Yellow indicator starts blinking and an alarm buzzer note is given.
2. In case the unit is not functioning properly, the Red indicator starts blinking and an alarm buzzer note is given.
Fit plug into the socket.
(5 Amp. plug)
Note: Kindly ensure that the
source (storage container) has
enough water before you
switch on your Aquaguard
Classic.
Flick on the main switch.
The LED will glow red
for 2-5 seconds.
Directly thereafter, a
yellow light will glow for
60 seconds indicating the
unit is processing water.
When the green LED
glows, a musical note is
heard, and the unit is
ready to deliver clear,
safe drinking water.
Switch on the water
control switch (toggle)
and you will find water
flowing out of your
Aquaguard Classic.
If the unit has not been
used for a day or two,
allow two to three glasses
of water to flow out
before using the water.
If the unit is not to be
used for the day, make it
a practice to turn the
main switch and water
supply off.
While you fill your glass a
pleasant musical tune will
be heard. Please note that
music is only an indicator
and has no relation to the
purification process.
8