Epson HWDV080DV(N Furnace User Manual


 
24632-0-0508Page 32
9
Pull blower cord from bottom to remove any excess wire from
inside of the heater and attach strain relief to the cord on the
underside of the heater. Insert strain relief into hole in the bottom
of the heater.
10
Plug power cord into wall receptacle and reattach front panel of
heater to complete installation.
For replacement parts see Parts List on pages 42 and 43 and Parts
View on page 44.
STRAIN
RELIEF
INSTALLATION OF OPTIONAL BLOWER KIT HW125SCB