Filter
Top Products
24632-0-0508Page 20
INTERIOR INSTALLATION OF THE FRONT OF THE UNIT
1
2
3
Line up the two (2) tabs on the top of the wall mounting plate
with the holes in the back of the unit. Slide the back of the unit
onto the tabs of the wall mounting plate.
After the back of the unit is attached to the wall, bring in the
gas line as shown on page 18, or follow the installation template
indications. Following your city, local and state codes, attach the
gas line to the unit.
NOTE: The gas line runs through the wall or floor of the
house..
GAS LINE
Secure the back of the unit into place using two (2) screws.
Replace casing door.