Filter
Top Products
Page | 41
REPLACING COMPONENTS
Control Board
The Control Board (Part # EP-CB08) is a digital read-out board. This board offers a wide
variety of settings to operate the unit. This part can be removed from the unit by loosening the
two outside screws and pulling the board back to the inside of the stove. The rear access panel
should be removed prior to removing the control board. A 6-amp “quick-blow” fuse is used on
this Control Board.
NOTE: The bottom three control buttons are preset at the factory and are not user adjustable.
See the “Daily Operation” section on pages 14-18 of the manual for more instructions
on Control Board settings.
Recommended Heat Ranges:
Low Burn: Heat Range setting: 1 Room Air Blower setting: 1
Medium Low: Heat Range setting: 2 – 3 Room Air Blower setting: *
Medium High: Heat Range setting: 4 – 8 Room Air Blower setting: *
High Burn: Heat Range setting: 9 Room Air Blower setting: 9
* NOTE: Blower Speed will automatically be adjusted to the desired Heat Range that you
select.