Filter
Top Products
26670-0-0110 Page 29
MAINTENANCE
Keep the control compartment, logs and burner area surround-
ing the logs clean by vacuuming or brushing area at least twice
a year.
THE LOGS CAN GET VERY HOT - HANDLE ONLY WHEN
COOL.
Always turn off gas to the pilot before cleaning. For relighting,
refer to the lighting instructions plate located in the lower com-
partment near the gas valve.
Never obstruct the ow of the combustion and ventilation air.
Keep the front of the rebox clear of all obstacles and materials.
Screen panels must be in position while replace is in operation.
An Accent Light Kit model LK2 is available for installation
in the top of the rebox. Providing the junction box has been
pre-wired with separate circuits as described in the "Wiring for a
dual switch/receptacle" section.
Follow the instructions provided with the LK2 Accent Light kit
for proper installation in the replace.