Meter setup and configuration worksheet Reference, Installation, and Operations Manual
June 2013 3-9000-743 Rev S
317 Meter setup and configuration worksheet
A
Appendix E Meter setup and configuration worksheet
E.1 Meter setup and configuration worksheet
List of Engineering Drawings
Use the reference sheet, Tab le E- 1, to assist you in the Daniel 3400 Series Gas Ultrasonic Flow Meter hardware and configuration setup and
using the Daniel MeterLink Field Setup Wizard (refer to the Daniel MeterLink Help files at any time for details about Liquid Ultrasonic
Meters.)
Table E-1 Daniel 3400 Series Gas Ultrasonic Flow Meter setup and configuration reference sheet (Sheet 1 of 6)
Refer to noted manual pages for the following installation/setup activities and write your choices in the “User Notes” column.
Hardware Installation
Type Description or P/N Manual Reference User Notes
• Hoist Slings • Determine Sling Size require-
ment
for your meter
• Use of appropriate safety engi-
neered swivel hoist rings in meter
end flanges, Page 3-43 in Section
3.2
• Meter Body Setup • Uni-directional
Or
• Bi-directional
• Do you want a
Uni-directional or
Bi-directional setup?
• Section 3.3.1
• Hazardous Area Installations • Explosion-proof conduit con-
nections and Switch Settings
for communications drivers
•
Section 3.3.5
• Flame-proof Cable • Cable wiring to Field Connec-
tion board
•
Section 3.3.6