Filter
Top Products
22
TROUBLESHOOTINGTROUBLESHOOTING
TROUBLESHOOTINGTROUBLESHOOTING
TROUBLESHOOTING
RESET BUTTONRESET BUTTON
RESET BUTTONRESET BUTTON
RESET BUTTON
If the thermostat does not respond
when keys are pressed, or the
thermostat is not operating properly,
you may use the reset button located
on the back of the thermostat body
(see fig. 2). Thermostat program-
ming and configuration will not be
affected by pressing the reset button.
However, the clock will need to be
reset.
RESETTING THERMOSTATRESETTING THERMOSTAT
RESETTING THERMOSTATRESETTING THERMOSTAT
RESETTING THERMOSTAT
CONFIGURATION ANDCONFIGURATION AND
CONFIGURATION ANDCONFIGURATION AND
CONFIGURATION AND
PROGRAMMINGPROGRAMMING
PROGRAMMINGPROGRAMMING
PROGRAMMING
The thermostat can be reset back to
default programs and configuration.
Removing power from the thermo-
stat will not reset it, because the
default settings are maintained in
permanent memory. Before
resetting the thermostat, you may
want to make note of the previously
selected configuration and program-
ming. You must reconfigure and
reprogram the thermostat after
resetting it using this method.
To reset the thermostat, press and
release PROGRAM
RUN
, then
press the
FAN
, TIME
BACK
and
buttons at the same time. This
will reset the thermostat to factory
default programs and configuration.
The display will momentarily go
blank, then all segments on the
display will momentarily be shown.
The thermostat will then go into the
HOLDHOLD
HOLDHOLD
HOLD mode and will maintain
factory preset temperatures.