Filter
Top Products
Reference Manual
IP2013, Rev BA
February 2012
Mobrey MSP422
www.mobrey.com
Appendix B Product Certifications
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-1
Manufacturing Location . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-2
European Union Directive Information . . . . . . . . . . . . . . . page B-2
Non-hazardous Location Certifications . . . . . . . . . . . . . . page B-2
SAFETY MESSAGES Procedures and instructions in this section may require special precautions to
ensure the safety of the personnel performing the operations. Information that
raises potential safety issues is indicated by a warning symbol ( ). Please
refer to the following safety messages before performing an operation
preceded by this symbol.
Explosions could result in death or serious injury:
The Mobrey MSP422 is only for use in a non-hazardous location
Failure to follow safe installation and servicing guidelines could result in death or
serious injury:
Make sure the transmitter is installed by qualified personnel and in accordance with
applicable code of practice.
Use the equipment only as specified in this manual. Failure to do so may impair the
protection provided by the equipment.
Do not perform any service other than those contained in this manual unless you are
qualified.
High voltage that may be present on leads could cause electrical shock:
Avoid contact with leads and terminals.
Make sure the main power to the transmitter is off and the lines to any other external
power source are disconnected or not powered while wiring the transmitter.