Filter
Top Products
Reference Manual
IP2013, Rev BA
February 2012
Mobrey MSP422
3-6
Figure 3-2.
Mounting The Mobrey MSP422
Using A Nozzle/Stand-off
NOTE:
If the transmitter face does not protrude into the vessel, note the dimensions
in Table 3-1 for Figure 3-2, and always ensure that the nozzle/vessel weld is
smooth and free from internal weld beads or other projections.
Table 3-1. Nozzle Diameter
Size (D) and Max Length (L)
Figure 3-3.
Mounting the Mobrey MSP422
Using a Bracket Kit
PTFE
L
D
Tighten To A Torque Of 1.5 lbf.ft (2 Nm)
Using The Hexagon. Do Not Use The
Housing To Tighten
Use Non-metallic
Fitting / Flange
Nozzle Diameter Size (D) Maximum Nozzle Length (L)
DN50 (2 in.) 4 in. (100 mm)
DN80 (3 in.) 6.3 in. (160 mm)
DN100 (4 in.) 6.3 in. (160 mm)
DN125 (5 in.) 11.8 in. (300 mm)
No. 4X 13 Long Self Tap
Screw (3 Positions)
Carbon Steel (Zinc Plated)
PVC Disc
Stainless Steel Bracket
Note: Combined weight of bracket
and disc is 16 oz (0,5 kg)