Filter
Top Products
3
Unpacking Instructions
1. Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description,
refer to exploded view illustration.
a. Fan motor assembly
b. Light kit assembly
c. One ceiling cover
d. One coupler cover
e. One glass shade
f. One light kit cover plate
g. Five fan blades
h. One hanger bracket
i. One hanger ball/4.5” downrod assembly
j. One transmitter control with switch covers
k. Two 50-watt (maximum) mini-candelabra base
halogen lamps
l. One loose parts bag containing:
1. One clevis pin
2. One hairpin clip
3. Five 12 ga. wire connectors
4. Two #8-32 x 1-1/4” threaded studs
5. Two #8 external tooth lockwashers
6. Two #8-32 knurled knobs
7. Twenty-one #10-24 x .375” flat head
blade screws
8. Twenty-one #10 x .50” flat washers
9. One balancing kit
NOTE: Place the parts from the loose parts bags
in a small container to keep them from being lost.
If any parts are missing, contact your local retailer
or catalog outlet for replacement before
proceeding.
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
c. CEILING
COVER
d. COUPLER
COVER
f. LIGHT KIT
COVER PLATE
g. FAN BLADES
h. HANGER
BRACKET
h. HANGER BALL/
4.5" DOWNROD
j. TRANSMITTER CONTROL
WITH SWITCH COVERS
b. LIGHT KIT
ASSEMBLY
a. FAN MOTOR
ASSEMBLY
e. GLASS
SHADE
i. LOOSE
PARTS BAG
k. 50-WATT MINI-
CANDELABRA BASE
HALOGEN LAMPS
WARNING
!
WARNING
!
2. Remove the lower styrofoam pad from the carton
and place on a stable work surface.
3. Remove the fan motor assembly from the
protective plastic bag and position the fan motor
assembly in the lower styrofoam packing so that
the top for the motor is facing you. Place all carton
contents on a soft protective surface.
ETL Model No.: CF550