Filter
Top Products
14
Unpacking
Check that you have the following items:
Main unit (1).
Subwoofer (1).
Speakers (5).
Remote control (1).
Video cable (4 feet x 1).
AM loop antenna (1).
FM antenna (1).
Owners Manual (1).
Quick Set Up Guide.
Inserting Remote Control
Batteries
You can control the system using the supplied remote.
Insert two batteries by matching the + and - on the
batteries with the markings in the battery compartment.
When using the remote, point it at the remote sensor on
the front panel of this system.
Notes:
Do not leave the remote in an extremely hot or humid
place.
Do not use a new battery with an old one.
Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so many cause a
malfunction.
If you will not use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Use only the size and type of batteries specified.
Be sure to follow the correct polarity when installing
the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh
ones.
Installation
This section describes how to connect the
system to the speakers, a TV monitor with
audio / video input jacks and other video
components. You cannot connect this system
to a TV monitor which does not have a video
input connector. Be sure to turn off the power
of each component before making the
connections.