(Inside Fold Line)
Arming in the “Away” Mode
Away mode arming is the highest arm level, intended for use when the premises is unoccupied. Both
perimeter and interior zones will be armed. The Ready light must be on or flashing for the alarm system to be
armed.
Secure all protected doors and windows.
1. Enter a User code.
2. The Armed and Exit lights will illuminate and the exit tone will start.
4. Leave the premises during the exit delay.
5. At the end of the exit delay the alarm system will be armed Away.
During the last 10 seconds of the exit delay time the exit tone will beat faster to warn you that the time is
about to expire. If you feel that you will be unable to get out and close the exit door in time we recommend that
you return to the keypad, disarm, and rearm.
Arming in the “Vacation” Mode
Vacation mode is a second level of Away mode. It can be used to activate energy saving
automation features when the building will not be occupied for an extended period of time. After
arming, pressing the Exit button at any time during the exit delay time to change the armed mode to
vacation. Unfortunately there is no visual indication at the M1KPAS for vacation mode.
Arming in the “Stay” Mode
Stay mode arming is intended for use when the premises is occupied. All perimeter doors
and windows are armed, and all interior zones are excluded.
Secure all protected doors and windows.
1. Enter a User code.
2. The Armed and Exit lights will illuminate and the exit tone will start.
3. Press the Stay key. The key will light up. All interior zones will be excluded and the
exit tone will be silenced. Delayed entry/exit zones will still be delayed.
4. (Option, may not be enabled) Additional presses of the Stay key may allow scrolling to
different modes of Stay arming if enabled by your installer. Additional modes are Stay
Instant, Stay Night, and Stay Night Instant. The is no visual indication for the optional
stay modes.
Auto Stay Arming
(Optional) If this feature was enabled by your installer, it will automatically change the arm
mode from Away to Stay if none of the perimeter delayed doors are opened during the exit delay
countdown time.
Secure all protected doors and windows.
1. Enter a User code.
2. The Exit key will light and the exit tone will start.
3. As long as there is not exit through any delayed doors the Stay light will come on and
the Exit light will go off at the end of the exit delay time. The system is now armed in
the Stay mode.
Using the Quick Arm
(Optional) If this feature was enabled by your installer, it will allow arming in either the
Away or Stay modes without having to enter your user code. For security reasons however, a
user code is always required to disarm.
Secure all protected doors and windows.
1. Press the Exit or Stay key.
2. The Armed and mode light (Exit or Stay) will illuminate just as if you had entered your
user code.
Changing Stay Modes While Armed
(Optional) If this feature was enabled by your installer, it permits various levels of Stay
mode arming to be enabled (scrolled) without having to first disarm the system. The additional
Stay mode arming levels may include: Instant, Stay Night, and Stay Night Instant.
1. Press the Exit or Stay key.
2. The Armed and mode light (Exit or Stay) will illuminate just as if you had entered your
user code.
Disarming and Resetting the System
After entering the premises through one of the assigned Entry delayed zones, the keypad
will sound a continuous entry delay tone. Refer to the System Notes for the amount of entry time
available.
Disarming
1. Proceed directly to the keypad.
2. Enter a valid user code.
3. The entry delay tone should stop.
4. When the Armed light turns off the alarm system is disarmed.
If a valid user code is not entered before the entry delay time expires, an alarm will occur.
If this should occur proceed as follows:
Disarming and Silencing After an Alarm
1. Proceed directly to the keypad.
2. Enter your user code.
3. The entry delay tone should stop.
4. When the Armed light turns off the alarm system is disarmed.
After an alarm has been silenced by a valid user code, a valid user code must be
entered a second time to “Acknowledgment” the alarm.
Disarming and Silencing During an Alarm
1. Proceed directly to the keypad.
2. Enter a user code.
3. The keypad entry tone and the alarm siren/bell will stop.
4. When the Armed light turns off the alarm system is disarmed.
5. If you are certain the alarm was accidental, contact the Central Monitoring Center to
avoid a false dispatch of the authorities.