Elk -M1KPAS Door User Manual


  Open as PDF
of 6
 
Page 1
Keypad Arming Station ELK-M1KPAS
FEATURES
! Blue/white Backlighted 12 button keypad
! Access to six (6) Programmable Functions
! Operates from the M1/EZ8 'RS-485' Data Bus
! Built-in Piezo Mini Sounder
! Quick arm keys for Exit and Stay
! Flush mounts into a standard electrical box. **
! Utilizes a standard decorator style electrical cover plate (not
included).
SPECIFICATIONS
! Connection: 4 Pin Plug-in "Flying Lead" Connector (Included)
! Color: White
! Operating Voltage: 13.8 VDC
! Current Draw: Less than 30 mA with min. activity - 44 mA fully active
! Size: 4.658" W x 5.5" H x .95" D (.375" D with recess mount)
Features and Specifications subject to change without notice.
L610 08/24/06
APPLICATION
The ELK-M1KPAS is an easy to use, slim line keypad for use in arming
and disarming any of the M1 Family Cross Platform Controls. It fits into
a single gang electrical box and utilizes any standard decorator style
faceplate. It handles basic functionality and displays system status
using 3 LEDs: Green for "Ready", Yellow for "Trouble", and Red for
"Armed". The low cost and small footprint of the M1KPAS Arming
Station makes it ideal for use as an alternative to the larger and more
costly LCD keypads. It is particularly well suited for partitioned jobs
such as an office, workshop, garage, etc., where full functionality is not
necessarily required. The 12 button keypad is backlighted with blue
LEDs and has quick arm keys for Exit (Away) and Stay. It also has a
"F" key (function key) for use in in activating 1 of 6 programmable
function operations.
PO Box 100 • Hildebran, NC 28637 USA • 828-397-4200 Voice • 828-397-4415 Fax
http://www.elkproducts.com • email: info@elkproducts.com
** The local AHJ (authority having jurisdiction) or State and local regulations may prohibit the installation of a M1KPAS
Arming Station into an electrical box together with any high voltage circuits. In some cases a special dual voltage box or
divider partition (separator) may be successfully used. One known manufacturer of these is "Carlon". Visit your local
home center or electrical supply company for availability. Elk specifically warns against improper use, particularly
unauthorized installation or servicing in conjunction with high voltage circuits except by licensed and qualified high
voltage personnel. Elk is not responsible for damages or harmful consequences. Always consult the local AHJ and
follow state and local regulations. In some cases the best solution is to install the M1KPAS into a separate and dedicated
single gang box.
next