Filter
Top Products
Timer operation
Timer off
The unit will turn off automatically according to your setting.
Timer duration can be set from a minimum of half an hour
(30 minutes) to a maximum of 1 hours.
Up to 10 hours, you can set in half-hour (30-minute) increments
and from 10 to 1 hours, you can set in 1-hour increments.
Point the remote control at the signal receiver window on the unit.
1. Press the TIMER OFF ( ) button and set the time
as desired.
• The time setting will change as you press the button
as follows.
Hold the button down to speed through the settings.
• The orange TIMER lamp on the unit will illuminate.
• The unit will emit a beep when it receives the signal.
• Once set, the time setting will countdown and show
the remaining time.
Display shows the unit set to turn off in 2.5 hours.
To cancel
Press the CANCEL button.
• The orange TIMER lamp on the unit will turn off.
NOTES ON TIMER SETTING AND OPERATION
• The last time setting will be memorized and will appear
on the remote control display the next time you set the
TIMER OFF or TIMER ON.
• The TIMER OFF and TIMER ON can not be set
simultaneously.
Only the most recent TIMER setting will be valid.
• When the OFF 1 HR TIMER is set, the TIMER OFF and
TIMER ON settings are unavailable.
• If the OFF 1 HR TIMER is set while the TIMER OFF or
TIMER ON is activated, the TIMER ON or TIMER OFF
setting will be cancelled.
• If a power failure occurs while the TIMER OFF or TIMER
ON is set, the TIMER setting will be cancelled and will
not be retrieved even after the power is restored.
0.5h 1.0h 1.5h 10h 11h 12h
1
0.5h 1.0h 1.5h 10h 11h 12h
1
Timer on
The unit will turn on automatically according to your setting.
Timer duration can be set from a minimum of half an hour
(30 minutes) to a maximum of 1 hours.
Up to 10 hours, you can set in half-hour (30-minute)
increments and from 10 to 1 hours, you can set in 1-hour
increments.
Point the remote control at the signal receiver window on
the unit.
1. Press the TIMER ON ( ) button and set the time as
desired.
• The time setting will change as you press the button
as follows.
Hold the button down to speed through the settings.
• The orange TIMER lamp on the unit will illuminate.
• The unit will emit a beep when it receives the signal.
• Once set the time setting will countdown and show the
remaining time.
Select the mode, temperature, fan speed setting and
PLASMACLUSTER operation as desired.
• When the temperature is set with the TIMER ON, the
temperature will show in the display for 5 seconds and
then return to the countdown display.
• If you do not change the setting, the unit will operate
using the most recent setting.
Display shows the unit set to turn on in 6.5 hours.
To cancel
Press the CANCEL button.
• The orange TIMER lamp on the unit will turn off.
0.5h 1.0h 1.5h 10h 11h 12h
1
0.5h 1.0h 1.5h 10h 11h 12h
1
1
0.5h 1.0h 1.5h 10h 11h 12h
1
electrolux EXP09CS1WI timer operation 17