Filter
Top Products
electrolux EXP09CS1WI front/rear view 7 electrolux EXP09CS1WI installation and removal of exhaust hose 7
The exhaust hose must be installed or removed in
accordance with the usage mode.
Mode Exhaust hose
Cool, fan, ventilation Install
Dehumidication Remove
Installation of the exhaust hose
1. Attach the insect guard net to the exhaust adapter.
Push the insect guard net rmly to ensure that four
projections on the exhaust adapter t into the four holes
on it.
2. Attach the Exhaust adapter to the exhaust hose.
Extend one end of the exhaust hose and insert it into the
Exhaust adapter, and turn it (approx. three times) until it
stops.
Make sure they are securely attached afterwards.
3. Attach the exhaust hose adapter to the unit.
Insert the two projections on the exhaust hose adapter
into the two holes on the unit, and rmly attach them to
each other.
Installation and removal of exhaust hose
Installation without “window kit”
The exhaust hose should be as short as possible for
operational efciency; however, it must not be twisted or
bent.
Unacceptable
Acceptable
Acceptable
Removal of the exhaust hose
1. Remove the exhaust hose adapter from the unit.
Lift up and remove the exhaust hose adapter from the
unit by pushing down on the two projections.
Hole
Projection
Exhaust adapter
Exhaust hose
Extend
Insent
guard net
Suction
disk
Projection
Projection
Hole