Filter
Top Products
5. You will find your cord retainer on the handle above
the upper cord hook. Firmly push the electrical cord
down into the cord retainer. This will place the cord
out of the way the next time you vacuum.
6. Next wind the cord around the two cord hooks on
the back of the cleaner.
7. Secure the plug to the cord to prevent unwinding.
Cord
Retainer
4
Cord
Hook
Step E Store Electrical Cord
Step D Store Accessories
Crevice
Tool
Cord
Hook
5
6
6
Nesting
Extension
Wands
Dusting/
Upholstery
Brush
Step C Replace Bag Cover
NOTE: Make sure bag is properly installed.
Check to see bag has not shifted away
from bag inlet during shipping. See
page 13 for further instructions.
4. Replace front cover by aligning tabs at bottom of
front cover into groove on cleaner. Pivot front cover
up against cleaner and rotate the bag cover latch
to the right to secure.
Bag Cover
Latch
Groove
Tabs
Bag Inlet