Electrolux EAS(C,E)12P5ASK(W,S,M) Air Conditioner User Manual


 
Press the SWING button on the remote
controller.
To stop the function, press the SWING
button again.
Press AIR DIRECTION button to lock
louver in desired position.
The AIR DIRECTION and SWING buttons
will be disabled when the air conditioner is
not in operation (including when the
TIMER ON is set).
Do not operate the air conditioner for long
periods with the air flow direction set
downward in cooling or dry mode.
Otherwise, condensation may occur on
the surface of the horizontal louver
causing moisture to drop on to the floor or
on furnishings.
Do not move the horizontal louver
manually. Always use the AIR DIRECTION
or SWING button. If you move this louver
manually, it may malfunction during
operation. If the louver malfunctions, stop
the airconditioner once and restart it.
When the air conditioner is started
immediately after it was stopped, the
horizontal louver might not move for
approximately 10 seconds.
Open angle of the horizontal louver should
not be set too small, as COOLING or
HEATING performance may be impaired
due to too restricted air flow area.
Do not operate unit with horizontal louver
in closed position.
When the air conditioner is connected to
power (initial power), the horizontal louver
may generate a sound for 10 seconds,
this is a normal operation.
45 electrolux how to use the indoor unit
Manual operation (without remote control)
Manual operation can be used
temporarily in case you can not find
the remote controller or its batteries
are exhausted.
1. Open and lift the front panel up to
an angle until it remains fixed with
a clicking sound.
2. One press of the manual control
button will lead to the forced
AUTO operation.
3. Close the panel firmly to its
original position.
Manual control
button
Once you push the manual button,
the operation mode is shifted in an
order as: AUTO, COOL, OFF.
Push the button twice, the unit will
operate in forced COOL mode. This is
used for testing purposes only .
Third press will stop the operation
and turn off the air conditioner
operation.
To restore the remote controller
operation, use the remote controller
directly.
Auto/Cool
manual operation (without remote control) electrolux 46