Electrolux EAS(C,E)12P5ASK(W,S,M) Air Conditioner User Manual


 
CANCEL: Push this button to
cancel the TIMER ON/OFF
settings.
TURBO*: Push this button on
COOL mode, the air conditioner
goes into powerful cooling
operation. Push again to cancel
the TURBO function.
*Note: Only for some models.
LED: Press this button to clear
the digit display in the air
conditioner, press it again to
activate it.
CLOCK: Use to set the time.
LOCK: When you press the
LOCK button, all current settings
are locked in and the remote
controller does not accept any
operation except that of the
LOCK. Press again to cancel the
LOCK mode.
12
13
14
15
37 electrolux remote control description
LCD display indicators
1 2 3
ATTENTION: All displays on the remote
controller are shown for illustration purposes
only.
4
5
6
7
8
TRANSMISSION INDICATOR: This
transmission indicator lights when
remote controller transmits signals
to the indoor unit.
MODE: Displays the current
operation mode. Including
AUTO( ), COOL( ), DRY( ),
HEAT*( ) , FAN ONLY ( )and back
to AUTO.
*Note: Not applicable to cooling
only models.
ON/OFF: Displayed by pressing the
ON/OFF button. Press the ON/OFF
button again to remove.
TIMER: Indicate Timer on/off time(0
23:50 hours) or clock time. The
clock time is indicated only when
no AUTO-ON/OFF timer is set.
When AUTOTIMER feature is
operating, it displays the AUTO-
ON/OFF time. To check the current
time, press the CLOCK button, and
the time will display.
TEMPERATURE: Displays the
temperature setting (17ºC to 30ºC
When you set the operating mode
to FAN ONLY, no temperature
setting is displayed.
LOCK: Displayed by pressing the
LOCK button. Press the LOCK
button again to remove.
SLEEP: Displayed by pressing the
SLEEP button. Press the SLEEP
button again to remove.
FAN SPEED: Displays the
selected fan speed, AUTO(no
display) and three fan speed levels
" " (LOW) " " (MED) and
" “ (HIGH) can be
indicated.
1
2
3
4
5
6
7
8
lcd display indicators electrolux 38
11
1
11
2
10
12
13
6
8
14
9
15
7
3
5
4