Filter
Top Products
Charcoal filter
The charcoal filter is already supplied and
mounted in place.
The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
Only applicable for recirculation. The charcoal
filters absorb smells and odours.
The charcoal filter cannot be washed nor
regenerated.
The charcoal filter should be replaced every 6
months under normal use.
Replacement filters are available from your
local Service Force Centre.
Fitting:
Unplug the unit or disconnect it from the
power supply
Remove the metal grease filter.
Fit the charcoal filter and fix it to the body
of the hood with two supplied screws.
Refit the metal grease filters.
To remove proceed in the reverse order.
Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the
registration plate located on the inside of the
unit.
The charcoal filter can be ordered from your
local ELECTROLUX Service Force Centre.
Changing the light bulb
Disconnect the cooker hood from the main
supply.
Remove the lamp cover, use a screw driver as a
lever.
Replace the old bulb with a new one of the
same type.
Refit the lamp cover.
If the light does not come on, make sure the
bulb has been inserted correctly before
contacting your local Service Force Centre.
Fig. 5 - Fitting the Charcoal Filter
Fig. 6 - Changing the light bulb
Charcoal
filter
Screw
Screw
Grease
filters