Filter
Top Products
Description of the Appliance
The cooker hood is designed to extract
unpleasant odours from the kitchen, it will
not extract steam.
The hood is supplied as a filter unit (with
charcoal filter already supplied and fitted) and
can also be used with an extractor function
function by removing the charcoal filter.
Extractor version
In this version fumes are extracted to the
outside via a hose connected to the coupling
ring.
Attention: The hose is not supplied and must
be purchased separately.
Remove the grease filters and remove the
Charcoal Filter from its housing by
unscrewing the two screws that fix it to the
hood. Refit the grease filters.
In order to obtain the best performance the hose
should have a diameter equal to the outlet hole.
Should there already be a pipe of diameter 125
or 120 mm that ducts to the outside through the
walls or roof, it is possible to use the 150/125-
120 mm reduction flange provided. In this case
the hood will be slightly noisier.
Fig. 1 - Extractor version
To the outside
Coupling
ring
Hose
Coupling
ring
Charcoal
filter
Screw
Screw
Grease
filters