Filter
Top Products
NOTE: DO not attempt to clean the Natural Cool Moisture
®
filter with any chemical solutions,
doing so will damage the filter.
• If the Natural Cool Moisture
®
filter appears to be clogged by hard water or mineral deposits,
soak it in a sink full of cool water for 10 minutes. DO NOT SQUEEZE OR WRING OUT THE
NATURAL COOL MOISTURE
®
FILTER. Always place it back in the humidifier wet.
There are many steps you can take each time you fill your humidifier to make sure you get the
most life out of our Natural Cool Moisture
®
filter.
1. To prevent mineral deposits use DuraFree
®
Humidifier Descaler Water Softener, part
no. AC-817, each time the Water Tank is refilled.
2. Treat the Natural Cool Moisture
®
filter with care. DO NOT squeeze or wring it out, DO NOT
clean the filter using any chemical solution.
3. Always purchase Honeywell Brand Natural Cool Moisture
®
filters as the fan motor
of this humidifier and the Natural Cool Moisture
®
filter are designed to function
efficiently as a set. Using any other filter could damage the motor or impair the
humidifier’s performance.
4. Be sure to empty water from the Water Tank and Base when not in use.
NOTE: AgION™ prevents the filter from growing fungus and bacteria. It is normal for the filter
to turn brown or rust colored from mineral build-up. This will vary depending on water
quality.
PROLONGING THE LIFE OF THE FILTER AND
MAINTAINING A CLEAN HUMIDIFIER
HU4085.01 DH-890 E/F/S OM 8/3/01 1:06 PM Page 7