Filter
Top Products
NOTE: WHEN CARRYING THE FILLED WATER TANK, PLEASE USE THE HANDLE AND PLACE
YOUR OTHER HAND UNDER THE TANK FOR ADDITIONAL SUPPORT.
• Place the Motor Housing back onto Rinse-to-Clean
®
Base.
• Once the filled tank has been positioned, do not attempt to move the humidifier. If it has to
be moved, unplug the humidifier and remove the water tank first.
NOTE: DO NOT POUR WATER INTO THE GRILL ON THE TOP OF THE MOTOR HOUSING.
DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL INJURY.
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN ELECTRIC SHOCK
COULD OCCUR.
POWER
• With the power switch in the OFF position, plug the filled humidifier into a polarized 120V
outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
HUMIDITY CONTROL
1. Set the fan speed control to the desired position (Fig. 4).
HIGH: For fast humidifying
LOW: For quieter operation
NOTE: The length of time your humidifier runs will vary depending on the quality of
construction and insulation of your room and house, as well as the fan speed.
2. Turn the humidifier OFF if the humidity level feels too moist or you notice condensation
forming on the walls and/or windows.
ALWAYS be sure to empty any unused water in the Rinse-to-Clean
®
Base and/or Water Tank
each time you refill the water tank or finish using the humidifier.
High
Low
O
ff
Fig. 4
FILLING CONTINUED
OPERATION
HU4085.01 DH-890 E/F/S OM 8/3/01 1:06 PM Page 5