Filter
Top Products
Programming Worksheets
41
International Programming
[701] First International Options Code
Default Option ON Off Section Page #
OFF
I_______I
1-4 For Future Use
OFF
I_______I
5 6-Digit User Access Codes 4-Digit User Access Codes 5.1 15
OFF
I_______I
6 Busy tone detection enabled Busy tone detection disabled 5.5 17
OFF
I_______I
7-8 For Future Use
Module Programming
[801] PC5400 Printer Module Programming
Please refer to your PC5400 Installation Manual for installation and programming instructions.
[802] PC59XX Audio Interface Programming
Please refer to your PC59XX Installation Manual for installation and programming instructions.
[803] Alternative Communicator Programming*
Please refer to your LINKS2X50, Skyroute Installation Manual for installation and programming instructions.
[804] PC5132 Wireless Expansion Programming
Please refer to your PC5132 Installation Manual for programming locations and instructions.
* LINKS2X50 and Skyroute modules have not been investigated by UL.
Special Installer Functions
[901] Installer Walk Test Mode Enable / Disable
(Section 5.30 “Walk Test (Installer)” on page 26)
[902] Module Supervision Reset
(Section 2.8 “Removing Modules” on page 5)
[903] Module Supervision Field
(Section 2.7 “Supervision” on page 5)
[904] Wireless Module Placement Test
For more information, please refer to your PC5132 Installation Manual
• Select the module / transmitter (Zones 01-32).
• Press [#] to Cancel.
Placement Led Keypad LCD Keypad Bell / Buzzer
Good Light 1 ON Steady “GOOD” 1 Beep / Squawk
Fair Light 2 ON Steady “FAIR” 2 Beeps / Squawks
Bad Light 3 ON Steady “BAD” 3 Beeps / Squawks
[990] Installer Lockout Enable
(Section 5.29 “Installer’s Lockout” on page 26)
[991] Installer Lockout Disable
(Section 5.29 “Installer’s Lockout” on page 26)
[993] Restore Alternative Communicator to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” on page 26)
[995] Restore Escort5580 to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” on page 26)
[996] Restore PC5132 to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” on page 26)
[997] Restore PC5400 to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” on page 26)
[998] Restore PC59XX to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” on page 26)
[999] Restore PC1555MX to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” on page 26)
WWW.DIYALARMFORUM.COM