Filter
Top Products
38
[348] Miscellaneous Opening (Disarming) Reporting Codes
(Section 5.8 “Communicator – Reporting Codes” on pg. 17, & Appendix A)
I_______I_______I
1. Opening by Duress Code 33
I_______I_______I
5. Opening by Supervisory Code 42
I_______I_______I
2. Opening by Duress Code 34
I_______I_______I
6. Auto Arm Cancellation
I_______I_______I
3. Opening by Master Code 40
I_______I_______I
7. Special Opening
I_______I_______I
4. Opening by Supervisory Code 41
[349] Maintenance Alarm Reporting Codes
(Section 5.8 “Communicator – Reporting Codes” on pg. 17, & Appendix A)
I_______I_______I
1. Battery Trouble Alarm
I_______I_______I
5. Auxiliary Power Supply Trouble Alarm
I_______I_______I
2. AC Failure Trouble Alarm
I_______I_______I
6. TLM Trouble Code (via LINKS)
I_______I_______I
3. Bell Circuit Trouble Alarm
I_______I_______I
7.General System Trouble
I_______I_______I
4. Fire Trouble Alarm
I_______I_______I
8. General System Supervisory
[350] Maintenance Restoral Reporting Codes
(Section 5.8 “Communicator – Reporting Codes” on pg. 17, & Appendix A)
I_______I_______I
1. Battery Trouble Restoral
I_______I_______I
5. Auxiliary Power Supply Trouble Restoral
I_______I_______I
2. AC Failure Trouble Restoral
I_______I_______I
6. TLM Restoral
I_______I_______I
3. Bell Circuit Trouble Restoral
I_______I_______I
7. General System Trouble Restore
I_______I_______I
4. Fire Trouble Restoral
I_______I_______I
8. General System Supervisory Restore
[351] Miscellaneous Maintenance Reporting Codes
(Section 5.8 “Communicator – Reporting Codes” on pg. 17, & Appendix A)
I_______I_______I
1. Telephone Number 1 FTC Restore
I_______I_______I
5. DLS Lead OUT
I_______I_______I
2. Telephone Number 2 FTC Restore
I_______I_______I
6. Zone Fault Alarm
I_______I_______I
3. Event Buffer 75% Full Since Last Upload
I_______I_______I
7. Zone Fault Restore
I_______I_______I
4. DLS Lead IN
I_______I_______I
8. Delinquency Code
[352] Test Transmission Reporting Codes
(Section 5.8 “Communicator – Reporting Codes” on pg. 17, & Appendix A)
I_______I_______I
1. Periodic Test Transmission
I_______I_______I
3. LINKS1000 Test Transmission Code*
I_______I_______I
2. System Test
*The LINKS Test Transmission Code must be programmed as “00” for the LINKS Test Transmission to be disabled.
[353] Wireless Maintenance Reporting Codes
(Section 5.8 “Communicator – Reporting Codes” on pg. 17, & Appendix A)
I_______I_______I
1. Wireless Device Low Battery Alarm
I_______I_______I
2. Wireless Device Low Battery Restore
[360] Communicator Format Options
(Section 5.9 “Communicator – Reporting Formats” on page 18)
NOTE: The Third telephone number follows the format of the First telephone number.
Default
02
I_______I_______I
1st/3rd Telephone Number
02
I_______I_______I
2nd Telephone Number
01 20 BPS, 1400 HZ handshake 04 SIA FSK
02 20 BPS, 2300 HZ handshake 05 Pager
03 DTMF CONTACT ID
[361] Alarm/Restore Communicator Call Directions
(Section 5.5 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I_______I
1 1st Telephone Number Disabled
OFF
I_______I
2 2nd Telephone Number Disabled
OFF
I_______I
3 1st Telephone Number (via LINKS) Disabled
OFF
I_______I
4 2nd Telephone Number (via LINKS) Disabled
OFF
I_______I
5-8 For future use
[363] Tamper/Restore Communicator Call Directions
(Section 5.5 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I________I
1 1st Telephone Number Disabled
OFF
I________I
2 2nd Telephone Number Disabled
OFF
I________I
3 1st Telephone Number (via LINKS) Disabled
OFF
I________I
4 2nd Telephone Number (via LINKS) Disabled
OFF
I________I
5-8 For future use
WWW.DIYALARMFORUM.COM