Filter
Top Products
ELATION Fireplace Insert 17
BLOWER REPLACEMENT
The blower is accessed through the firebox.
1. Unplug the blower cord or switch off circuit breaker.
2. Remove the glass as shown on page 13.
3. Remove logs and burner.
4. Remove the bottom of firebox by removing the 10 screws around the perimeter and the 2 in
the back of the firebox.
5. Disconnect the two wires attached to the blower motor.
6. Remove the two blower retaining screws and lift out the blower.
BLOWER WIRING DIAGRAM