Filter
Top Products
27
3 Operating
G
3.2 Switching off and
retracting the power
cable
1. Switch off the cylinder vacuum cleaner using the on/off
switch (Fig. 14/1) and pull the plug out of the socket.
2. Keep the plug in your hand.
3. Press the cable retract button (Fig. 14/2) to pull in the
power cable.
3.3 Transporting and
storage
To transport the cylinder vacuum cleaner, you can
carry it using the carry handle (Fig. 1/11).
When setting the appliance aside or during work
breaks, you can hang the parking hook (Fig. 15/1) into the
parking hook mount (Fig. 15/2).
For storage, you can hang the stow-away hook
(Fig. 16/1) into the stow-away hook mount (Fig. 16/2) below
on the cylinder vacuum cleaner.
If you want to store the appliance for a longer period of
time, remove the dust filter bag and dispose of it correctly.
Clean the filters as well.
Always store the appliance in a cool and dry place.
WARNING:
The power cable can whip around when being pulled in,
it can also trip you or somebody else up or knock down
objects.
Fig. 14
2
1
WARNING:
If you leave your work area, switch off the appliance and
observe the instructions under ZChapter 3.2, "Switching
off and retracting the power cable".
ATTENTION:
Never position the appliance directly against heat
sources (e. g. heating, oven). Avoid direct sunlight. Heat
can damage the appliance.
Fig. 15
1
2
Fig. 16
2
1
02_M7050_gb.book Seite 27 Donnerstag, 22. März 2007 3:23 15