Filter
Top Products
24
2 Unpacking and assembly
5. Push the accessories mount (Fig. 5/1) onto the handle
(Fig. 5/2). Then push the furniture brush (Fig. 5/3) and
crevice nozzle (Fig. 5/4) on to the holders for these.
Your cylinder vacuum cleaner is now ready to use.
2.3 Using other nozzles
(accessories)
Together with the floor nozzle just assembled, you can
expand the range of functions of your cylinder vacuum
cleaner with other nozzles.
The crevice nozzle and the furniture brush are included
as accessories in the scope of delivery. They can be
secured to the accessories mount (Fig. 5) when not in use.
- Crevice nozzle (Fig. 6/1)
Use this to vacuum dust from hard to reach places.
- Furniture brush (Fig. 6/2)
Use this to vacuum dust off objects that have
sensitive surfaces (e. g. cupboards, tables).
Also available as an option are the following:
- Turbo brush (Fig. 7)
This has a rotating brush head and is therefore best
suited for deep-cleaning carpets. Brushing also
causes the carpet pile to straighten up.
- Parquet brush (Fig. 8)
This is equipped with long bristles and is used for
vacuuming particularly sensitive surfaces (e. g.
parquet, laminate flooring).
NOTE:
If necessary, you can also attach the accessories mount
to the telescopic tube.
Fig.
5
3
2
4
1
NOTE:
When using the turbo brush, a loud noise can occur as a
result of the high speed of the brush.
WARNING:
Only assemble the nozzles if the plug has been removed
from the socket. The appliance could be switched on by
accident.
Fig. 6
2
1
Fig. 7
Fig. 8
02_M7050_gb.book Seite 24 Donnerstag, 22. März 2007 3:23 15